TeleGizmos Telescope Covers
These ultra tough, weather-resistant covers reflect sunlight to keep
the telescope inside cool on the hottest days, and they shed dew,
rain and dust to keep things inside dry and clean.
Wide enough to fit over finder scopes and accessories, long enough
to cover the telescope and tripod head. The shock cord drawstring
closure allows the cover to be closed and secured to the tripod.
Specs are below, please measure your setup to select the proper
size cover.
Superior to metalized mylar covers, this multi layer material
consists of polyethylene film, aluminum and reinforcing fabric
layers, providing great tear and puncture resistance as well as
resistance to sunlight damage. All seams are double lapped and
sewn, and covers fold flat for storage. Durable welting covers
opening and contains the drawstring.
One very important feature of these covers is that there is no
absorbant material used. Other covers have an inner surface that
can absorb moisture and hold it in contact with your equipment!
Through sun, wind and rain, these covers last longer than the
light-weight silver ones. This isn't "tarp" material, see below!
Samples of the material are available, please call or email.
Customer Testimonial
One year warranty! Please note these covers are not intended or
warranted 24/7/365 full time outdoor use, or for use in sustained
high winds or severe weather. Our continuous exposure covers
are HERE.
Also please note that covers to be returned due to shipping
damage must include the shipping box you received the cover in.
Warranty does not apply to covers that are cut while being unpacked!
SCT covers have a cylinder style design with a round top for good
fit for scopes parked in Alt-Az configuration. Choose a larger size
for wedge mounted SCTs, see dimensions below.
GEM type covers have a sloped top and rounded ends and fit with
diagonal and finder installed, and they fit over the counterweight
shaft. With drawstring closure that draws the cover up around the
tripod head. Measure your scope and check dimensions below.
Lay-down style covers for big Dobs slip over the UTA end and have
a rectangular section for the rocker box. With draw string for the
opening and two web straps for securing and attaching weight.
#TGTP is a cover for the tripod head and legs, completing full
coverage where it is needed. More information is here
#TGSO Solar Observing Hood is simple to use and easy to install.
Dual layer design with our solar material on the outside to reflect
heat, and a black opaque inner liner to provide light blockage.
Significantly improves your solar observing experience. Velcro
closure to secure the cover to your scope.
#TGMB is a cover for the secondary mirror assembly on big Dobs
and Newtonians. Also covers refractor focusers with gear installed,
cameras, or holds several frosty cans of your favorite beverage.
The drawstring holds securely, and the bag is deep and rigid
enough to cover and clear a valuable big secondary mirror.
#TGCC Cooler Covers fit ice chests with dimensions listed below to
help keep your frosty things frosty or toasty things toasty. Reflective
surface and air space complement your cooler's insulation. Not for
extended outdoor use or for 60 MPH wind in the back of your pickup
truck! With elastic closure.
Covers are shown with drawstrings loose.
SCT and GEM type covers:
More sizes coming soon, and custom sizes are available!
* * * * 365 Series Continuous Exposure Covers are HERE!
Prices include shipping in the USA!
Ordering Information
Specifications:
#TG06: 59" circumference, 30" height
#TG08: 52" circumference, 37" height, weighs 6 oz
#TG09: 58" circumference, 42" height, weighs 8 oz
#TG11: 64" circumference, 42" height, weighs 9 oz
#TG12: 62" circumference, 43" height, weighs 9 oz
#TG14: 71" circumference, 54" height, weighs 10 oz
#TG16: 84" circumference, 70" height, weighs 16 oz
#TG1D: 62" circumference, 53" height, weighs 11 oz
#TG2D: 90" circumference, 69" height, weighs 16 oz
#TG3D: 94" circumference, 78" height, weighs 1.2 lbs
#TG4D: 115" circumference, 90" height, weighs 1.7 lbs
#TG5D: 25" diameter at UTA, 97" total length, 37" square rocker section
#TG6D: 25" diameter at UTA, 109" total length, 37" square rocker section
#TG7D: 32" diameter at UTA, 123" total length, 46" square rocker section
#TGET: 40" circumference, 25" height, weighs 3 oz
#TGG1: For GEM mounted 10-12" SCTs, up to 28" long tube, 36" major height
#TGG2: For GEM mounted 14" SCTs, up to 38" long tube, 60" major height
#TGR2: For GEM & Alt-Az scopes up to 16" long and 4" diameter, 20" major height
#TGR3: For GEM mounted scopes up to 20" long and 6" diameter, 23" major height
#TGR4: For GEM mounted scopes up to 30" long and 8" diameter, 32" major height
#TGR5: For GEM mounted scopes up to 45" long and 9" diameter, 42" major height
#TGR6: For GEM mounted scopes up to 58" long and 10" diameter, 48" major height
#TGR6L: For GEM mounted scopes up to 58" long and 10" diameter, 60" major height
#TGN8: For GEM mounted scopes up to 46" long and 13" diameter, 57" major height - LXD55/75 SN10, SN8 with Dew Shield
#TGN1: For 10" f5 Newt on GEM, 50" long and 19" diameter, 56" major height
#TGLB-12: For Lightbridge 12", Tube section 42", box width 26", box height 26", total length 68"
#TGLB-16H: For Lightbridge 16", Tube section 37", box width 34", box height 37", total length 71"
#TGMB: 6" diameter, 8" deep - Secondary Assembly Cover for Big Dobs, Etc.
#TGTP: Tripod leg spread up to 50 inches, leg height up to 52 inches
#TGCC: Cooler Bonnet fits coolers up to 27" x 15", height is 13"
#TGR3 fits: Up to 3" f5 refractors, Short Tube 80
#TGR4 fits: Up to 4" f6 refractors, Orion ED80 & ED100, Orion (Synta) 100mm f6
#TGR5 fits: Up to 5" f8 refractors, Orion 120mm f8.3
#TGR6 fits: Up to 6" f1000-1200 Refractors
#TGR6L fits: Up to 6" f1000-1200 Refractors on Large Gems: CI-700, Tak NJP, GM 11
#TGLB-12 for Meade Lightbridge 12" - - Click to enarge
ScopeStuff Home
365 Series Continuous Exposure Covers are Here!
Eva-Dry E-333 Renewable Dehumidifier
Dri-Rod Dehumidifying Heater Rod
Tripod Cover is Here!
Copyright 2000-2009 ScopeStuff
