Do-it-yourself HyperTune kit for LXD55 and LXD75 Mounts
The Do-it-yourself HyperTune kit allows you to upgrade and service your
own mount! LXD55.com has collected all of the parts and tools necessary
for you to perform a similar upgrade service as performed in the HyperTuneŠ
Service offered at LXD55.com. The entire process will take about 2 to 3 hours
minimum, so be prepared to work for a little while. While you watch the step
by step video, we point out common repairs that have to be done, and
adjustments that will make your LXD55/75 mount perform well. When you are
finished, you will have a smooth working mount which will provide you with
wonderful 'less stressful' nights of enjoying the night time skies.
In addition, you will have a complete buffet of tools left over for later use,
including a Meade #505 clone cable so you can hook your scope up to a
computer, for computer controlled GOTO slewing. The included video is a
complete guide for taking your mount apart adjusting and servicing all of
the internal components, and putting it all back together.
Your kit will include the following:
1) Complete set of all scope alan wrench sizes
2) Philips screwdriver
3) Selected sandpapers
4) Polishing compound
5) 4-40 gear set screw replacements
6) Lock tight
7) Razor cutting knife
8) Cleaning brush
9) Internal Lithium Grease
10) Detailed photo breakdown of mount and parts
11) AutoStar firmware upgrade cable. This can later be used for computer
controlling your scope.
12) DVD step-by-step video of HyperTune instructions. The DVD will play in
90 % of all players on the market. If you have questions whether or not the
DVD will play in your player, contact us.
Things you will need in addition to this list are:
1) 100% Mineral Spirits (Paint Thinner)
2) Containers for holding parts
3) Cleaning gloves
4) Paper Towels
5) Needlenose pliers
6) PC with Windows loaded.
Prices include shipping in the USA!
Ordering Information
ScopeStuff Home