---

ScopeStuff Bluetooth Adapter Specs

Wireless RS232 9 Pin Bluetooth Adapter Features:
* Supports Bluetooth® Serial Port Profile and Generic Access Profile
* Bluetooth specification version 2.0+EDR
* No need of external host software once configured
* Easy installation and use
* Configuration thru RS232 with AT command set
* Auto connect, secure pairing of two units is configurable
* No maintenance once configured
* Class 1, supports up to 100 meters (line of sight)

Specifications:
* Baud Rate: 4800/9600/19.2K/38.4K/57.6K/115.2K/230.4Kbps
* RS232 Signals: TxD, RxD, GND, CTS, and RTS, D_SUB 9-pin female
* Frequency: 2.400 to 2.4835 GHz
* Hopping: 1,600/sec, 1MHz channel space
* Modulation: GFSK-1 Mbps, DQPSK-2 Mbps, and 8-DPSK-3 Mbps
* Tx Power: Max. 18 dBm (~60mw) Bluetooth Class 1
* Rx Sensitivity: -86 dBm typical
* Antenna: RP SMA female with external antenna
* Power Supply: 5-6 VDC, 90ma max
* Operating Temperature: -20°C to +75°C
* Dimensions: 35 mm (W) x 65 mm (D) x 16 mm (H) (without antenna)


Sample Configuration:
ati1
ATC=0, NONE FLOW CONTROL
ATD=0000-00-000000, NEVER SET BLUETOOTH ADDRESS
ATE=0, NEVER ECHO CHARACTERS
ATH=1, DISCOVERABLE
ATK=0, ONE STOP BIT
ATL=1, BAUD RATE is 9600
ATM=0, NONE PARITY_BIT
ATN=ScopeStuff, LOCAL NAME
ATO=0, ENABLE AUTO CONNECTING
ATP=1234, PIN CODE
ATQ=0, SEND RESULT CODE
ATR=0, MASTER ROLE
ATS=0, DISABLE AUTO-POWERDOWN OF RS232 DRIVER
ATX=1, ALWAYS CHECK '+++'



Return to Bluetooth RS232 Adapter Page

ScopeStuff Home